Hyundai Elantra Flex Pipe Guide: 2011-2016 Elantra 1.8L, 2013 Coupe and 2014-2016 Elantra GT 2.0L

Reviewed 2026-10-03. Checked against the sources listed below. This is general information, not a substitute for a mechanic's inspection.

Quick answer

The AFECO 52560 front flex pipe fits three specific Elantra combinations: the 2011-2016 Elantra 1.8L, the 2013 Elantra Coupe 1.8L and the 2014-2016 Elantra GT 2.0L. The engine has to match the body style: an Elantra sedan with a 2.0L engine is not on the list. A worn flex pipe usually shows up as a rumble on acceleration, a rattle or buzz near the front, and sometimes a check engine light.

Exact fit

Years	Model	Engine	Drive
2011-2016	Elantra (sedan)	1.8L 4-cylinder	Front-wheel drive
2013	Elantra Coupe	1.8L 4-cylinder	Front-wheel drive
2014-2016	Elantra GT	2.0L 4-cylinder	Front-wheel drive

Match both the body and the engine. Only the combinations in this table are listed. Check Displacement (L) and the model name in the free NHTSA VIN decoder before you order.

A good flex pipe with intact outer braid and inner liner next to a worn one with frayed braid, soot and an exhaust leak — Check the braided section for frayed strands and black soot.

Signs your Elantra's flex pipe is worn

Louder exhaust, especially a rumble when you accelerate
Buzzing or rattling from under the front floor
Puffing or hissing near the front of the car
Black soot around the braided section
Exhaust smell in or around the car
Check engine light, if the leak upsets the oxygen sensor readings

Is there a recall?

We checked NHTSA's recall database for the 2011-2016 Elantra and 2014-2016 Elantra GT. None of the safety recalls listed involve the exhaust system. NHTSA's system returned no complaint data for the 2013 Elantra Coupe, so check your own VIN at nhtsa.gov/recalls.

Before you buy

Confirm the leak is at the flex pipe and not a gasket at either end. Soot at the flange points to the gasket.
Check the engine mounts. A worn mount lets the engine move too far and wears flex pipes out early.
Match the body style and engine to the table above.

Fitting notes

The AFECO 52560 is direct-fit and includes hardware. Use new gaskets at both flanges, do not twist the braided section while fitting it, and tighten the flange nuts evenly.